CN|   EN

Tower Rod 12 Meters Internal Longitudinal Seam Gas Shield Welding Machine

Product overview

Tower Rod 12 Meters Internal Longitudinal Seam Gas Shield Welding Machine using gantry walking, work piece fixing mode; rotator walking speed adopts servo stepless speed regulation, can meet the requirements of welding speed adjustment. Welding rotator walking, welding start or stop control is linkage with welding power supply.

Sales Telephone:0086-531-81203188

Whatsapp:0086-15688868820

E-mail:huafeicnc@hotmail.com

Address:No.12 Tonghua Road, Huashan Development Zone, Licheng District, Jinan,Shandong,China

Product introduction

Internal Longitudinal Seam Gas Shield Welding Machine 09-Side.jpg

EQUIPMENT APPLICATION AND SCOPE

●Application: pyramid communication tower internal longitudinal seam automatic welding.

●Welding mode: gas shield welding (with oscillator).

●Scope of application: thickness 4mm-14mm; maximum length: 12000mm; diameter: Ф300mm-Ф1400 mm.

●Job status: work piece welding surface is smooth, the largest seam gap less than 2mm.

●Condition of work piece surface: no pollution, serious corrosion etc.

●Work piece state before welding:

Work piece is placed on rotator, making sure the welding seam is on six o’clock direction.

By using spot weld, the work piece need to be welded firmly, then keep clean the welding spot, fixing the run-on and run-off tab.


1538034496579422.jpg


Internal Longitudinal Seam Gas Shield Welding Machine 08 -Wire Feeder.jpg


Internal Longitudinal Seam Gas Shield Welding Machine 05 -Process.jpg




●Tower internal longitudinal seam welding using gantry walking, work piece fixing mode; rotator walking speed adopts servo stepless speed regulation, can meet the requirements of welding speed adjustment. Welding rotator walking, welding start or stop control is linkage with welding power supply.

●In view of the tower has a certain taper, adjustable rotator using screw adjusting type, the distance between roller seats adjust through the manual screw; according to the internal longitudinal seam to adjust the spacing between the roller seats, make the longitudinal welding in horizontal position as far as possible.

●Internal longitudinal seam welding machine head is equipped with two dimensional mechanical tracking mechanism, can reduce the frequent adjustments due to cylinder placed errors.

●Equipped with a welding oscillator, swing or not during welding.

●Near the machine head equipped with tv surveillance cameras, convenient welding observation.



1538034634108646.jpg     1538034584931078.jpg

Internal Longitudinal Seam Gas Shield Welding Machine 10 -Weldign Rotator.jpg


塔杆内纵缝焊接专机17-图纸.jpg


Name

E-mail *

Phone

Country

Message

Machine Model *

Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support Wenhui media