CN|   EN

Special shape tank gantry type welding

Product overview

Welding process:1. Tank longitudinal seam weldinga. Align the start position of the welding seam through the travel of gantry frame and slide plate moving;b. Gantry frame travel(travel speed change to...

Sales Telephone:0086-531-81203188

Whatsapp:0086-15688868820

E-mail:huafeicnc@hotmail.com

Address:No.12 Tonghua Road, Huashan Development Zone, Licheng District, Jinan,Shandong,China

Product introduction

Welding process:

1. Tank longitudinal seam welding

a. Align the start position of the welding seam through the travel of gantry frame and slide plate moving;

b. Gantry frame travel(travel speed change to frequency stepless speed regulation), start longitudinal seam welding, Operator adjust the welding seam offset in real time manually. Welding head is with welding oscillator, can be used when required.

2.Tank Circular seam welding

a. Align the axle center position of the welding seam through the travel of gantry frame and slide plate moving;

B. Welding positioner drive workpiece rotate to finish seam welding, mechanical tracking device adjust the angle and height of welding gun automatically, real-time tracking of workpiece surface; and the mechanical tracking device capable of weld in the axial offset can be automatic fine tuning.

C. workpiece rotary speed can be adjusted automatically, to meet the requirement of welding.

D. head with a welding oscillator, can be used when needed


technical parameter

Model No. LZM-4.0
Gantry trolley travel speed 220-2200mm/min(infinite speed variation)
Torch horizontal moving speed 2200mm/min


Application example

Name

E-mail *

Phone

Country

Message

Machine Model *

Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support Wenhui media