CN|   EN
CNC Flame Cutting Machine Common defects and cause 3
Publisher:HUAFEI CNC       Release time:2019-04-22 13:15
If you are looking for a product or other problem , call the service hotline at any time, or communicate with us online! Service hotline:0086-531-81203188

CNC flame cutting machine greatly improve cutting efficiency and reduces workers labor intensity, how to cutting good quality, it need us to think more in the work. The following is our factory Jinan Huafei summary and analysis, hope can provide powerful help on cutting quality.

main flaw

cause

1

cutting section bumpy

1. High cutting oxygen pressure,

2. Long distance between cutting nozzle and work piece.

3. Cutting nozzle blocked or damaged, so wind line be deformed

2

Cutting seam up big down narrow

1. Cutting speed is too fast

2. Long distance between cutting nozzle and work piece.

3. Cutting nozzle blocked or damaged, so wind line be deformed

3

Cutting seam up big down narrow

1. Cutting speed is too fast, cutting speed is too fast

2. Cutting nozzle not suitable, bigger.

3. Long distance between cutting nozzle and work piece.

4

Cutting section hollow: in the entire cutting section, especially middle hollow

1. Cutting speed is too fast,

2. cutting nozzle too small, low cutting pressure, Cutting nozzle blocked or damaged

3. Long distance between cutting nozzle and work piece.


Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support锛?a href="http://www.cnwenhui.cn">Wenhui media

鐑嚎

鍜ㄨ鐑嚎

0086-531-81203188