CN|   EN

CNC rotary welding turntable positioner for pipe/tube/flange

Product overview

The seat positioner is composed of a rotary mechanism, a turnover mechanism, a frame, and an electronic control system. It can make the welding seam in a horizontal or ship-shaped position by turning or tilting the seam when it is working. This product is widely used in the welding of rotating parts such as shafts, discs, cylinders and so on.

Sales Telephone:0086-531-81203188

Whatsapp:0086-531-81203088

E-mail:huafeicnc@hotmail.com

Address:No.12 Tonghua Road, Huashan Development Zone, Licheng District, Jinan,Shandong,China

Product introduction

20T welding positioner

  The seat positioner is composed of a rotary mechanism, a turnover mechanism, a frame, and an electronic control system. It can make the welding seam in a horizontal or ship-shaped position by turning or tilting the seam when it is working. The switching system of the work. The control system can be the control of the operator of the work. Equivalent to three types of configuration button digital control, switch digital control and switch relay control. This product is widely used in the welding of rotating parts such as shafts, discs, cylinders and so on. It is the most widely used structural form of present.

Welding positioner can be divided into three categories:

2T and 5T welding positioner

(1)Workpiece welding positioner: including welding positioner, welding roller, welding rotator, and welding turnover. 

(2) Welder positioner: including welding manipulator. 

(3) Welding worker positioner: including an elevator for welding worker, etc. 

Rotary welding positioner is used for rotating or tilt workpiece, make welding seam in right place. It is mainly used for the rack, engine base, flange, sealing head, and another long workpiece welding also can be used in the assembly, cutting, inspection, etc.

Welding rotary is a simplified positioner, it rotates around the vertical axis or a certain inclined Angle, it’s mainly used for workpiece welding, overlay welding, and cutting. 

Welding positioner details

Characteristics: 

(1) Welding positioner has a wide welding speed range and good stiffness. 

(2) Applying different workpiece dimensions and shapes. 

(3) In the transmission chain, should have self-locked driving, to avoid workpiece fall down accident when power cut off suddenly. 

Welding positioner details

(4) It can be used with a welding robot and precision welding positioner, depending on the welding method and different workpiece, the position accuracy and orbit precision (contour) should be controlled between 0.1-2 mm, and the highest accuracy should be up to 0.01 mm. 

(5) Return faster, but should avoid impact and vibration. 

(6) Welding positioner has a wide welding speed range and good stiffness. 

Welding positioner details

(7) Applying different workpiece dimensions and shapes. 

(8) In the transmission chain, should have self-locked driving, to avoid workpiece fall down accident when power cut off suddenly. 

(9) It can be used with a welding robot and precision welding positioner, depending on the welding method and different workpiece, the position accuracy and orbit precision (contour) should be controlled between 0.1-2 mm, and the highest accuracy should be up to 0.01 mm. 

Welding positioner details

(10) Return faster, but should avoid impact and vibration. 

(11) The baseline should be installed on the surface of the workpiece, used for clamping workpiece. 

(12) If used as an assembly welding positioner will have shock resistance. And it has an installation slot, it has higher strength and shock resistance. 

technical parameter



Application example

Name

E-mail *

Phone

Country

Message

Machine Model *

Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support Wenhui media