CN|   EN

Longitudinal Seam Welding Machine

Product overview

Longitudinal automatic welding machine use several welding method, such as argon submerged welding, gas shielded welding and plasma welding etc.

Sales Telephone:0086-531-81203188

Whatsapp:0086-15688868820

E-mail:

huafeicnc@hotmail.com

Address:No.12 Tonghua Road, Huashan Development Zone, Licheng District, Jinan,Shandong,China

Product introduction

●Key-type pneumatic pressing device is applied to calmp the work piece. This device provides force evenly to work piece and prevents deformation. ●It is widely applied in high quality welding and low-deformation straight seam. Use in such field: petrochemical industry, solar water heater manufactor, pipeline and automobile industry. ●Controlled by PLC, driven by DC motor, and stepless speed regulation, with control system to realize automatic welding,and equipped with straight oscillator for optional choice.  主要技术参数  MAIN TECHNICAL DATA ● With different protection lining on the lower side, the welding seam can be welded through. Therefore the both sides of the welding seam can be shaped with single-side welding. ●Its welding thickness is 1mm~8mm, welding speed is 0.2mm~2.2m/min. ●Longitudinal automatic welding machine use several welding method, such as argon submerged welding, gas shielded welding and plasma welding etc.


● Key-type pneumatic pressing device is applied to calmp the work piece. This device provides force evenly to work piece and prevents deformation.

● It is widely applied in high quality welding and low-deformation straight seam. Use in such field: petrochemical industry, solar water

heater manufactor, pipeline and automobile industry.

● Controlled by PLC, driven by DC motor, and stepless speed regulation, with control system to realize automatic welding,and equipped with straight oscillator for optional choice.

Longitudinal Seam Welding Machine 05.jpg

● With different protection lining on the lower side, the welding seam can be welded through. Therefore the both sides of the welding seam can be shaped with single-side welding.

● Its welding thickness is 1mm~8mm, welding speed is 0.2mm~2.2m/min.

● Longitudinal automatic welding machine use several welding method, such as argon submerged welding, gas shielded welding and plasma welding etc.

拼图附件.jpg


MAIN TECHNICAL DATA 


Model No.

Welding length(mm)


Min. diameter(mm)

 Max. diameter(mm)

ZF-500

≤ 500

75

750

ZF-1000

≤ 100

100

750

ZF-1500

≤ 1500

120

750

ZF-2000

≤ 2000

160

750

ZF-2500

≤ 2500

200

750

ZF-3000

≤ 3000

270

750



MAIN TECHNICAL DATA   型号 Model No.	焊接长度Welding length(mm)	最小直径 Min. diameter(mm)	最 大 直 径 Max. diameter(mm) ZF-500	≤ 500	75	750 ZF-1000	≤ 100	100	750 ZF-1500	≤ 1500	120	750 ZF-2000	≤ 2000	160	750 ZF-2500	≤ 2500	200	750 ZF-3000	≤ 3000	270	750


●Key-type pneumatic pressing device is applied to calmp the work piece. This device provides force evenly to work piece and prevents deformation. ●It is widely applied in high quality welding and low-deformation straight seam. Use in such field: petrochemical industry, solar water heater manufactor, pipeline and automobile industry. ●Controlled by PLC, driven by DC motor, and stepless speed regulation, with control system to realize automatic welding,and equipped with straight oscillator for optional choice.  主要技术参数  MAIN TECHNICAL DATA ● With different protection lining on the lower side, the welding seam can be welded through. Therefore the both sides of the welding seam can be shaped with single-side welding. ●Its welding thickness is 1mm~8mm, welding speed is 0.2mm~2.2m/min. ●Longitudinal automatic welding machine use several welding method, such as argon submerged welding, gas shielded welding and plasma welding etc.


Name

E-mail *

Phone

Country

Message

Machine Model *

Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support Wenhui media